The analyse of theary about effect on angular error for reflective characterisitic of move angular cone prism 角度誤差影響運動角錐棱鏡反射特性的理論分析
The compensative relations between the tilt angular errors and groove - width difference were obtained and the compensative methods were discussed 針對光柵拼接中的轉角誤差和光柵常數誤差,得到了誤差間的相互補償關系式,并對補償方式進行了討論。
Angular calibration of radar antenna system is composed of the calibration of angular error sensitivities ( also called directional sensitivity ) , adjustment of cross - coupling of azimuth and elevation signals , and the calibrations of system errors such as antenna axial system error , dynamic delay and so on 雷達系統天線的角度標校包括對系統角誤差靈敏度(又稱定向靈敏度)的標定、方位俯仰信號交叉耦合的調整以及對天線軸系誤差、動態滯后等系統誤差的標定。
At last , the paper did a detailed analysis on the measurement principle , measurement method , measurement data and measurement precision . explicit the purpose and meaning of measuring the static precision of turn table . after comparison the author decided the reasonable and fitting method to measure the turn table ’ s static precision which include turn table ’ s angular error , intersection and perpendicularity 最后,本文將重點放在了轉臺機械臺體的靜態精度測試方面,明確對轉臺機械臺體靜態精度測試的目的,指出靜態精度測試包含的三個內容,即轉臺的回轉精度測試、軸系相交度測試和軸系垂直度測試。